|
| |
 |
Self-Lubricating-Bronze L-Gibs
(for Gib Assemblies) |
 |
- L-Gibs for the Gib-assemblies shown on the previous page.
- These L-Gibs can be ordered separately for other applications.
- Made of Ampco bronze with oil-impregnated-graphite plugs for continuous
self-lubrication.
- Two corners are beveled to fit in milled pockets.
- Pre-drilled screw holes. Pre-drilled pilot-holes can be finished for dowel pins.
- Resistant to corrosion and welding splatter.
- Maximum 400° F operating temperature.
- Maximum 3500 psi load.
|
 |
Self-Lubricating-Bronze L-Gibs
(for Gib-Assemblies) |
| GAL'GT |
Self-Lube-Bronze
L-Gibs |
|
GAL’GT
Self-Lubricating-
Bronze L-Gibs
(Order No.) |
Length
(L) |
Width
(W) |
Height
(H) |
Gib
Height
(GH) |
Gib
Width
(GW) |
Screw
Hole
(A) |
Screw
Hole
(B) |
Screw
Hole
(C) |
Dowel
Hole
(D) |
Beveled
Corner
(T) |
Total
Screw
Holes
(N) |
| 16-3GAL24GT |
3.00 |
1.00 |
0.75 |
0.375 |
0.250 |
2.625 |
- |
- |
2.12 |
0.26 |
2 |
| 16-3GAL32GT |
4.00 |
1.00 |
0.75 |
0.375 |
0.250 |
3.625 |
- |
2.00 |
3.12 |
0.26 |
3 |
| 16-3GAL40GT |
5.00 |
1.00 |
0.75 |
0.375 |
0.250 |
4.625 |
- |
2.50 |
4.12 |
0.26 |
3 |
| 16-4GAL24GT |
3.00 |
1.255 |
0.88 |
0.500 |
0.375 |
2.625 |
- |
- |
2.12 |
0.32 |
2 |
| 16-4GAL32GT |
4.00 |
1.255 |
0.88 |
0.500 |
0.375 |
3.625 |
- |
2.00 |
3.12 |
0.32 |
3 |
| 16-4GAL40GT |
5.00 |
1.255 |
0.88 |
0.500 |
0.375 |
4.625 |
- |
2.50 |
4.12 |
0.32 |
3 |
| 16-4GAL48GT |
6.00 |
1.255 |
0.88 |
0.500 |
0.375 |
5.625 |
3.875 |
2.12 |
5.12 |
0.32 |
4 |
Self-Lubricating-Bronze
L-Gib Applications
| Note |
- Apply a light weight oil during final assembly to start the self-lubrication.
- It is permissible to cut gibs to shorter lengths if desired. Cutting
through graphite plugs is allowed but the plugs should be removed if more than half is cut
away.
|
Back to Top
Please call or email us for current pricing.
Back to Top
Back to Top
Ampco is a trademark of Ampco Metal Inc., Milwaukee, WI.
|
