|
| |
 |
Solid-Bronze Wear Strips |
| Cam Forming Die |
 |
Solid-bronze wear strips in a cam forming die can provide low friction surfaces
for slide and cam-driver movements. In operation, the cam-driver pushes the slide to the
left to wrap the sheet metal under the anvil when the die is closed. When the die is
opened, the return-spring pushes the slide away from the anvil enabling part ejection.
Grease fittings or other lubrication means should be provided for these wear strips if
ordered without the optional graphite plugs. |
Back to Top
| Custom
Mold Slide |
 |
| Solid-bronze wear strips in a mold can provide low friction surfaces for slide
and heel-block movements. In operation, the angle-pin and heel-block push the slide to the
left to close the molding cavity when the mold is closed. When the mold is opened, the
angle-pin pulls the slide away from the molded part enabling part ejection. Grease
fittings or other lubrication means should be provided for these wear strips if ordered
without the optional graphite plugs. The slide and heel block can be made of 4140 steel,
P20 steel, or other materials. |
Back to Top
|
